Vocal and Backing

AI Vocal Remover

Load a song, let the AI vocal remover pull the voice away from the backing, and download the side your cover, remix, or rehearsal needs.

  • Vocals and backing split apart
  • Karaoke mixes from any song
  • Voice kept on its own
  • MP3, WAV, FLAC, M4A, video
Start Splitting a Song
YouTube tools

What an AI Vocal Remover Gives You

One song goes in and two usable tracks come back.

A song arrives as one file with the singer sitting on the instruments, and no volume knob removes the voice alone. An AI vocal remover works out which parts belong to the singer and which to the rest. What comes back is the backing on one side and the vocal on the other, so a track you already own turns into material for a cover, a remix, or a rehearsal.
Info

The off-vocal you want may not exist

Plenty of songs never get an official instrumental release, and the streaming version is often the only one that exists. Wanting to sing a track at a party or record a cover does not make an off-vocal appear. An AI vocal remover gives you a backing to perform over that same evening, at the tempo you have already rehearsed to.
A karaoke backing track split from a finished song
Info

Hear how the singer shapes words

Singing along with a full mix hides a lot, because the original voice competes with the drums and the chords. Once the vocal sits on its own, you notice where a phrase is pushed early, which syllables are held longer, and where the breath falls. That is the detail you copy to make a cover sound considered rather than recited.
Studying an isolated lead vocal phrase by phrase
Tip

A vocal track is material

Producers rarely want the whole song. They want the hook, four bars of the chorus, or one ad-lib with the room around it still audible. Keeping the voice apart from the backing lets you drop that piece into a different tempo, layer it under a new beat, or cut it into a short clip without dragging the old arrangement along.
A vocal stem placed into a remix session
Info

Upload the song in any format

Songs arrive in whatever form you already have them: a downloaded MP3, a FLAC from a friend's drive, an M4A pulled from a voice memo, or a music video that nobody ever separated into parts. Sound-only files must stay within 10 MB, and a video is accepted just as readily, with the soundtrack inside it as the source.
Bringing a song in as audio or video
Tip

Not every mix splits the same

A studio mix keeps the voice on top of everything else, which gives an AI vocal remover an easier job. Live recordings are harder: crowd noise, a room microphone, and instruments bleeding into the vocal mic all land somewhere in the result. If the voice comes back with a little of the band attached, that is the recording rather than the tool itself.
An AI vocal remover result from studio and live takes
Info

Return to a song later

A project rarely finishes in one sitting, and re-uploading a long track just to get the other half is a waste of an evening. Songs you have processed stay in your list, so returning to one lets you take the vocal you skipped the first time or the backing you had not thought about, with the earlier result still there to compare against.
Reopening a separated song from the list

What the AI Vocal Remover Hands Back

Each upload returns separated tracks you can play, store, and send on.

Audio or video in

Songs arrive as WAV, FLAC, M4A, or MP3 within the 10 MB limit, or as a video file holding the same track.

Voice off the mix

The lead vocal lifts away while the instruments hold their arrangement, level, and tone underneath.

Backing for covers

Rehearse over the instrumental, record a cover, or run karaoke without an official off-vocal to hand.

Vocal as raw material

The isolated voice plugs into a remix, a short clip, or a hook you are building around it.

Pull it up again

A song you processed once stays listed, so a second track from it needs no fresh upload.

Save what you need

Play the result back, then keep whichever side you want (vocal, backing, or both) as a 320 kbps MP3 or an uncompressed WAV.

How to Run the AI Vocal Remover

Three steps from a finished track to a file you can sing over.

1
Step 1

Add the song

Bring the audio file or the video it sits in, then let the AI vocal remover read the mix.

2
Step 2

Pick the side you want

Open the vocal and the backing separately, and listen to each one before deciding what to keep.

3
Step 3

Take the track away

Save the vocal, the instrumental, or both, as an MP3 or a WAV, ready for your session.

Who Reaches for an AI Vocal Remover

Four people who wanted one side of a track.

JP

Jiho Park

Indie Musician

The session files for my own track were gone, but a live set needed a stripped version. The split backing arrived that night.

ML

Minjae Lee

DJ and Remix Creator

A remix needed the hook on its own, without the original drums underneath. Running the track through an AI vocal remover let me lay it over a new beat.

SK

Seoyeon Kim

Cover Singer

Learning a song by ear meant guessing at the fast lines. Hearing the lead voice by itself showed me where each phrase turns, and the backing became my rehearsal track.

HC

Haeun Choi

Short-Video Music Editor

Short clips need a vocal I can cut between shots. With the voice apart from the music, I drop it under a new track.

Before You Split a Song

Common questions about stems, formats, and what the split leaves behind.